PROJECT 4B : BLUEPRINT (PARALINE)

Project 4B need us to produce drawings of plan and elevation (front, right, left and back) of sculpture that I did for Project 4A.
Next, we also need again to compose an Axonometric drawings.

Blueprint, from wikipedia, is a paper-based reproduction usually of a technical drawng, documenting an architecture or an engineering design.

Here, here some steps that how I can to produce the multiview orthographic projection...

View 1 (Front & Left)

View 2 (Right & Front)

View 3 (Back & Right)

View 4 (Left & Back)

View 5 (Plan)

Sketch the line

Continue to draw the line 

Add shadow element. Project 4B/1 is complete.

Next project, compose from multiview orthographic projection to Axonometric projection.

View of sculpture

First of all, I draw Isometric projection. Thus, the horizontal line is produced, then draw angle of 30⁰

 from horizontal line. So, the drawings are formed. 

Sketch the line of bottom of sculpture

Complete of Project 4B/2

Axonometric projection

Axonometric projection is a type of parallel projection, more specifically a type of orthographic projection, used to create a single pictorial drawing of an object.

There are three main types of axonometric projection : Isometric, Dimetric and Trimetric projection.

"Axonometric" means "to measure along axes".

Isometric - The three principal axes make equal angles with the picture plan.

Dimetric - Two of the three principal axes make equal angles with the picture plane.

Trimetric - The three principal axes make unequal angles with the picture plane.